DOGON "SOLEIL", MALI

DOGON
SOLEIL 3
2.5" high
$300

DOGON
SOLEIL 4

2.75" high
$300

DOGON
SOLEIL 5

2.5" high
SOLD

The Dogon "soleil" above have been vetted as authentic.


The Dogon style "soleil" below were probably made to be sold.

DOGON STYLE
SOLEIL 6
2.5" high
$150

DOGON STYLE
SOLEIL 7

2.6" high
$150

DOGON STYLE
SOLEIL 8

2.5" high
$150

Photographs © Hamill Gallery

Known as "soleils" because of their resemblance to a stylized sun, the braided texture of these pendants reflects their lost-wax technique of fabrication. Actual wax has been braided in forming the wax model from which the pendants were cast. The short stub on all the pieces was where the casting sprue fed the molten bronze or brass into the wold holding.  As you know they would shape the wax, cover it first with a thin coat of clay and then surround it with clay.  The mold was then heated and then generally turned over so that the molten wax was poured out into a calabash holding water so that the wax could be reused.  After the wax was ‘lost’ from the mold the space was then available to receive the molten metal which was poured into the opening where the sprue was.  After cooling the now baked clay  mold was broken and the caly carefully removed from the bronze / brass casting.  This took time and care so as to not break the openwork casting.

Numbers 3 and 4.  Authenticity is obvious in the two shiny ’solars' that show smoothed area of wear and use.  The larger of the two shiny pieces also shows signs of verdigris - ‘bronze disease - an indication of age and use. Good casting and condition.

The single dark one, number 5, is interesting in that the surface is one that I have seen before.  It is uniform and shows a higher quality of casting.  It has 20 well defined ‘rays’ reaching out of the center opening while the other three trade pieces with leather show 16.  I tend to believe this one.  Why is the surface so consistent - well it could have been placed on a shrine after its owner died or was a burial piece.

The three with leather straps, numbers 6, 7 and 8, were made for the trade.  Badly cast and similar in surface and leatherwork. This grouping of three pieces were cast and afterwards darkened by an accretion of smoke and soot that where broken off the surface show shiny metal.  Not a natural process of darkening through time and wear.   Also the leather strapping is also similar and really would not have functioned to hold the pieces around the neck which was usually done by braided length of leather, like a think cord.   Look as though they come out of the same work shop.

With thanks to Dan Mato

GO TO DOGON OBJECTS PAGE

GO TO DOGON OBJECTS ARCHIVES PAGE (ALL SOLD)

GO TO ART OF DOGON EXHIBITION PAGE

GO TO AROUND THE HOUSE EXHIBITION PAGE

GO TO DOGON FIGURES PAGE

GO TO DOGON MASKS PAGE

GO TO DOGON ART PAGE

GO TO AFRICAN FIGURES PAGE

GO TO MASKS AND HEADS PAGE

GO TO AFRICAN METALWORK PAGE

GO TO NEW ADDITIONS PAGE

HOMEPAGE

 Index by
TRIBE

 Index by
OBJECT

CONTACT US